镇江新区浩邦模具制造有限公司
镇江新区鸿运合金工具有限公司 镇江新区金鹏电镀设备厂 镇江新区良工电器设备厂 镇江新区姚桥红颖五金厂 镇江新区姚桥民冬纺机配件厂 镇江新区玉龙压铸件有限公司 镇江新兴模具制造厂 镇江鑫裕玻纤制品科技有限公司 镇江叶星机械有限公司 镇江亿能机械设备有限公司 镇江展鸿缝制机械商贸有限公司 镇江志佳冷暖设备有限公司 镇江中德新型材料有限公司 万宝电气集团有限公司 无锡惠清过滤净化设备有限公司 无锡泰博尔进出口有限公司 向荣集团有限公司-营销公司 扬中博达新材料有限公司 扬中鼎盛机电设备有限公司 扬中华盛电热电器有限公司 扬中凯达橡塑密封件有限公司 扬中市八桥镇永根五金配件厂 扬中市超普液压设备有限公司 扬中市恒华电仪设备有限公司 扬中市恒泰工程机械密封件厂 扬中市华尔发五金电器经营部 扬中市慧华仪表厂 扬中市金凯电器厂 扬中市久华电气设备厂 扬中市骏豪电气设备有限公司 扬中市凯宇电器设备厂 扬中市联合美德金刚石工具厂 扬中市培阳密封件有限公司 扬中市晟沓电力科技有限公司 扬中市石伟密封件有限公司 扬中市天成密封科技有限公司 扬中市万忠仪表厂 扬中市旺鑫电气设备有限公司 扬中市新坝镇聚星桥架厂 扬中市兴旺机械密封件厂 扬中市优特氟塑制品有限公司 扬中市油坊镇鑫荣橡塑制品厂 扬中市中德变压器厂 意利达实业有限公司 毅宏科技有限公司 银河拉丝模具厂 有能电气有限公司 运河冲压件厂 张家港众宇钢铁贸易有限公司 镇丹新型材料科技有限公司 镇江博闻交通物资有限公司 镇江昌达电气有限公司 镇江创鑫机械电器设备有限公司 镇江丁卯新区恒达机械配件工加厂 镇江东航电力设备有限公司 镇江法岚德机械制造有限公司 镇江鸿鹏机械有限公司 镇江华鑫磨具有限公司 镇江汇金橡塑制品有限公司 镇江吉宏电气有限公司 镇江杰能石化机械有限公司 镇江金志州电气有限公司 镇江凯尚节能科技有限公司 镇江凯通电气有限公司 镇江柯罗萨尔机械设备有限公司 镇江乐图精密钣金有限公司 镇江立凯电力设备有限公司 镇江隆源机械有限公司 镇江门吉重工设备有限公司 镇江诺兴传动（联轴器）制造有限公司 镇江人本轴承有限公司 镇江瑞虹机械贸易有限公司 镇江瑞硕粉末冶金有限公司 镇江瑞通工业自动化有限公司 镇江赛普机械有限公司 镇江三虎金属制品有限公司 镇江三通铝业有限公司 镇江韶航自动化设备有限公司 镇江深合铸件清理有限公司 镇江市博达新材料有限公司 镇江市昌盛服装机械有限公司 镇江市丹徒区荣炳佳秀五金厂 镇江市丹徒区旭起冶金机械配件厂 镇江市丹徒区泽晖机械厂 镇江市鼎一包装材料有限公司 镇江市东明橡塑有限公司 镇江市光宇工程机械有限公司 镇江市华建能源设备有限公司 镇江市惠灵顿膜业有限公司 镇江市京口庭玉五金经营部 镇江市久运档案设备有限公司 镇江市巨亿电气有限公司 镇江市凯杰油品化工厂 镇江市龙创炉料有限公司 镇江市美盛电气有限公司 镇江市美思泰机械有限责任公司 镇江市尼诺专用设备开发制造有限公司 镇江市鹏润机电有限公司 镇江市起源金属制品有限公司 镇江市谦瑞辰工程机械有限公司 镇江市荣盛工具有限公司 镇江市荣远机械有限公司 镇江市瑞扬环保设备有限公司 镇江市润隆工程机械有限公司 镇江市润州庆荣金属工艺厂 镇江市山特机电工程有限公司 镇江市胜得机械制造有限责任公司 镇江市思创冷暖设备有限公司 镇江市天威电气有限公司 镇江市天祥精密机电有限分公司 镇江市祥和机械制造有限公司 镇江市旭辉聚氨酯设备有限公司 镇江市雨欣密封件有限公司 镇江市长城线路设备有限公司 镇江苏海电力科技有限公司 镇江苏仪德科技有限公司 镇江泰祥机电设备有限公司 镇江腾隆工程机械有限公司 镇江同创精密科技有限公司 镇江威力精密机械有限公司 镇江威奇机械科技有限公司 镇江伟骏机械有限公司 镇江伟龙轴承有限公司 镇江新区大港雨辰商行 镇江新区丁卯广腾五金经营部 镇江新区飞标精密机械有限公司 镇江新区昊峰工具制造有限公司 镇江中铭电子有限公司 镇江重村新材料有限公司 |
A powerful, complete hydraulic pressure calibration system to cover a wide workload Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include: · No weights to load and unload, transport or send out for calibration · Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature · No piston-cylinder changes · No significant sensitivity to level or vibration · Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration · Operates in any unit of measure, switching easily from one unit to the next The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers. The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi). The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface. RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly. The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi). The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available. High performance calibration made simple Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box. · Pressure ranges available to 200 MPa (30,000 psi) · ± 0.02 % of reading total one-year accuracy, 0.025 % for two years · Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort · Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation · Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 · Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium · AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment · Optional foot switch accessory allows hands-free data collection when running AutoTests · Rechargeable battery pack and transport case options for field operation
·
·
1. Combined linearity, hysteresis, and
repeatability. Precision does not include stability or calibration reference
uncertainty.
通用配件:
，，
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
       |
| 地址：青岛市崂山区海尔路29号温哥华花园5-1-401 电话：0532-86069117 83812497 83821263 传真：0532-88786387 网址：www.3017.cn 青岛东方嘉仪电子科技有限公司 版权所有 备案号: 鲁ICP备08106748号 
|
 |