客户荣誉
kehury
技术文章
  • 常州PPC4E Gas Pressure Controller Kits 6241
  • 振荡器的基本概念及工作原理介
  • 影响涂层测厚仪测量精度的因素
  • TDS3000B数字荧光示波器解决当今功率测量问题
  • 半导体热电阻的特点
  • 压力校验仪带HART功能的好处
  • 机器设备噪声测试的新方法--振动法测噪声
  • 电子测量基础(三)
  • 电磁继电器的参数、种类和选用方法
  • 安捷伦科技推出业内第一个高带宽4+16通道混合信号示波器
  • 常州阿尔丰机械有限公司
    常州艾齐瑞机械设备有限公司
    常州安霸自动化设备有限公司
    常州奥普托机械制造有限公司
    常州奥斯美机械设备有限公司
    常州百尔川模型有限公司
    常州百家汇工程机械有限公司
    常州百罗特紧固件厂
    常州宝飞机械有限公司
    常州常钼数控机械设备有限公司
    常州常耐动力机械有限公司
    常州常友热处理有限公司
    常州超林机械有限公司
    常州诚实机械有限公司
    常州诚信厨房设备有限公司
    常州驰电精密机械有限公司
    常州驰工液压设备有限公司
    常州仇氏机械有限公司
    常州川勤机械涂装设备有限公司
    常州大业船用设备制造有限公司
    常州道同工程机械有限公司
    常州道源机械智能技术有限公司
    常州德飞机械有限公司
    常州德广精密机械有限公司
    常州德马特机械有限公司
    常州迪悉精密机械有限公司
    常州顶润机械有限公司
    常州鼎协机械制造有限公司
    常州鼎亚模具有限公司
    常州东阳太阳能工程有限公司
    常州贰拾陆度机床附件制造有限公司
    常州凡玖传动设备有限公司
    常州飞奇机械有限公司
    常州丰饶精密机械有限公司
    常州丰一园冷暖设备有限公司
    常州福禄动力机械有限公司
    常州富仁涂装设备有限公司
    常州国傲刀具科技有限公司
    常州海盾船用机械设备有限公司
    常州海恩机械科技有限公司
    常州海兰德精密机械有限公司
    常州涵潞精密锻造有限公司
    常州汉旗机械制造有限公司
    常州好享节能设备有限公司
    常州昊锋诺机械有限公司
    常州浩源港口设备有限公司
    常州宏昊自动化设备有限公司
    常州华贝涂装设备有限公司
    常州华帆轴承有限公司
    常州桓基机械有限公司
    常州汇意特机电装备有限公司
    常州霍格姆机械有限公司
    常州吉程瑞元机械设备有限公司
    常州佳曼轴承有限公司
    常州佳斯特机械科技有限公司
    常州佳轴轴承有限公司
    常州嘉业智能装备科技有限公司
    常州建金高频设备厂
    常州健泽机械有限公司
    常州箭速机械科技有限公司
    常州金尔特模具科技有限公司
    常州金槐机械有限公司
    常州劲凯机械制造有限公司
    常州井夏机械设备有限公司
    常州景腾模型有限公司
    常州九一涂装设备有限公司
    常州九友清洗有限公司
    常州居阳电机维修厂
    常州巨方机械设备有限公司
    常州俊牌模具有限公司
    常州俊昇模具有限公司
    常州康克斯机械有限公司
    常州科力新机械科技有限公司
    常州克来奇轴承有限公司
    常州快捷特包装机械有限公司
    常州莱普鑫自动化设备有限公司
    常州朗尊紧固件有限公司
    常州乐梯高机械设备有限公司
    常州雷尼信智能电机有限公司
    常州磊鸿武精密机械有限公司
    常州力马干燥机械有限公司
    常州利庭机械有限公司
    常州联创精研微轴制造厂
    常州良誉机械有限公司
    常州林光机械有限公司
    常州领航机械有限公司
    常州隆仕玛自动化设备有限公司
    常州马塞尔机械设备有限公司
    常州麦吉机械科技有限公司
    常州蔓庭拓普工程机械有限公司
    常州铭威机械有限公司
    常州摩那机械科技有限公司
    常州能扬机械有限公司
    常州珀锐数控设备有限公司
    常州普东自动化设备有限公司
    常州启拓机械设备有限公司
    常州汽能机械科技有限公司
    常州庆普机械有限公司
    常州庆阳精密机械有限公司
    常州求鼎精密机械有限公司
    常州热阳机械有限公司
    常州人江模具机械厂
    常州瑞博特精密机械有限公司
    常州瑞海模具有限公司
    常州萨米特机械设备有限公司
    常州赛孚机械制造有限公司
    常州山崎机械有限公司
    常州世百通轨道设备销售有限公司
    常州市安航机械有限公司
    常州市百旭机械有限公司
    常州市邦普机械有限公司
    常州市博高机械有限公司
    常州市博棱机械有限公司
    常州市常安机床搬运有限公司
    常州市常茂模具有限公司
    常州市超牛涂布设备有限公司
    常州市晨可模型有限公司
    常州市程伟铸造有限公司
    常州市创导干燥设备有限公司
    常州市达祺机械有限公司
    常州市德珀特机械有限公司
    常州市钉当机械制造厂
    常州市东顺清洗有限公司
    常州市都是佳滚针轴承厂
    常州市芳能机械有限公司
    常州市丰源机械制造有限公司
    常州市福依特机械有限公司
    常州市高博机械有限公司
    常州市躬耕志机械有限公司
    常州市广烨轴承有限公司
    常州市海达自动化设备有限公司
    常州市韩现工程机械有限公司
    常州市瀚铎机械制造有限公司
    常州市恒纳机械有限公司
    常州市华胜达机械有限公司
    常州市环通自动化设备有限公司
    常州市江南环保设备有限公司
    常州市捷诚佳隆数控设备有限公司
    常州市捷佳顺涂布设备有限公司
    常州市金港港口设备有限公司
    常州市锦名顺机械设备有限公司
    常州市锦珊瑚机械有限公司
    常州市晶莹机械制造有限公司
    常州市军宝河机械制造厂
    常州市骏垒机械有限公司
    常州市科峰涂装材料有限公司
    常州市科捷自动化设备有限公司
    常州市科语丰干燥设备有限公司
    常州市坤德机械厂
    常州市坤仁机械有限公司
    常州市坤翔机械有限公司
    常州市猎豹焊割设备有限公司
    常州市灵动智能装备有限公司
    常州市闽牌机械有限公司
    常州市茗杰锐机械设备有限公司
    常州市铭诚机械有限公司
    常州市南鼎机械设备有限公司
    常州市欧仁模具有限公司
    常州市鹏林机械设备有限公司
    常州市鹏泽机械制造有限公司
    常州市普和瑞机械有限公司
    常州市奇特乐减速机有限公司
    常州市荣宏机械厂
    常州市润跃机械有限公司
    常州市上锐工业紧固件有限公司
    常州市生久不锈钢制品有限公司
    常州市胜天模具有限公司
    常州市双旺机械科技有限公司
    常州市斯贝佳滚针轴承有限公司
    常州市斯诺威特电机有限公司
    常州市索比特起重机械有限公司
    常州市太利得制冷设备有限公司
    常州市泰强机电有限公司
    常州市泰瑞精密刀具有限公司
    常州市天邦机械有限公司
    常州市亭星减速机有限公司
    常州市通华机械有限公司
    常州市图邦干燥工程有限公司
    常州市拓阳干燥机械有限公司
    常州市伟威机械制造有限公司
    常州市五彩凤凰涂装有限公司
    常州市五星三邦货物流有限公司
    常州市武进区遥观福瑞德机械有限公司
    常州市希诚机械有限公司
    常州市星润裕机械有限公司
    常州市雪冰冷藏设备有限公司
    常州市永平机械制造有限公司
    常州市友利桐自动化设备有限公司
    常州市宇能制冷设备有限公司
    常州市煜得博机械有限公司
    常州市元涛机械有限公司
    常州市云耀机械有限公司
    常州市展辰紧固件有限公司
    常州市长航精密机械有限公司
    常州市振志机械有限公司
    常州市正牌机械设备有限公司
    常州双运机械制造有限公司
    常州顺创精密机械有限公司
    常州顺宏机械有限公司
    常州思烨电机科技有限公司
    常州苏迈克机械有限公司
    常州苏群干燥设备有限公司
    常州速莱自动化设备有限公司
    常州腾锦机械制造有限公司
    常州腾联塑料机械有限公司
    常州腾轩机械科技有限公司
    常州腾翼精密模具厂
    常州天酬机械制造有限公司
    常州天祥节能科技有限公司
    常州拓朗工程机械有限公司
    常州万达九州机械有限公司
    常州万佳电机有限公司
    常州万腾超声波设备有限公司
    常州威如机械部件有限公司
    常州威森豪机械有限公司武进分公司
    常州韦文清洗有限公司
    常州文亮机械厂
    常州文予机械有限公司
    常州锡力动力机械有限公司
    常州锡卫德动力机械有限公司
    常州先竹干燥设备有限公司
    常州新盛太阳能科技有限公司
    常州新优涂涂装科技有限公司
    常州鑫得力起重设备有限公司
    常州鑫向力机械有限公司
    常州鑫佑军机械有限公司
    常州雄博工程机械有限公司
    常州轩致机械制造有限公司
    常州延贤机械制造有限公司
    常州耀富标准件有限公司
    常州烨联轴承有限公司
    常州一航焊割设备有限公司
    常州伊力亚特机械设备有限公司
    常州亿善干燥设备有限公司
    常州优加利焊割设备有限公司
    常州优真机械设备有限公司
    常州悠长久源农机有限公司
    常州友创力机械制造有限公司
    常州又引精密机械有限公司
    常州佑品精密机械有限公司
    常州远鸿精密机械有限公司
    常州泽祺佳机械有限公司
    常州治力机械科技有限公司
    常州中钎焊接装备制造有限公司
    常州中宇机械设备科技有限公司
    常州众百福工程机械有限公司
    常州重光齿轮制造有限公司
    常州宙斯盾动力机械有限公司
    当前位置:首页 > 常州仪器仪表 > 常州电子电工 > 常州计量校准
    PPC4E Gas Pressure Controller Kits
    型 号:6241
    品 牌:美国FLUKE
    技术指标:Power requirements
    100 to 240 V ac (-15%, +10%), 50-60 Hz, 70 VA max consumption
    常州PPC4E Gas Pressure Controller Kits-6241-美国FLUKE

    A simple, complete gas calibration solution

    Fluke Calibration 6241 and 6242 PPC4E gas pressure controller kits feature PPC4E models to cover a very wide workload combined with the accessories needed for a complete calibration system. Included is the Fluke Calibration SPLT self-purging liquid trap to capture moisture in the test line and automatically purge to prevent contamination of the PPC4E, preventing errors and protecting your investment. Also included is interconnect hardware and a test station with a quick connect fitting to mount your pressure device to be tested. 6241 and 6242 kits provide the hardware for a complete gas calibration system.

    ·         Precise pressure measurement and automated control, with ranges available from ± 15 kPa to 14 MPa (± 2.2 psi to 2,000 psi)

    ·         Gauge, absolute and negative gauge (vacuum) modes included on most models

    ·         Switch between absolute, gauge and bidirectional gauge modes and meet easy-to-understand full-year measurement specifications without added hardware or special calibration or maintenance operations

    ·         ± 0.02 % one-year accuracy of any selected Autorange span, with Autorange span as low as 1 % of device full scale. Up to 100:1 accurate ± 0.02 % measure and control range turndown can truly be realized by a single calibrator

    ·         Self-purging liquid trap included to automatically protect PPC4E from system contamination

    ·         AutoTest™, AutoRange, ready/not ready indicator, set point jog feature, real-time measurement uncertainty display, RS-232 and IEEE-488.2 remote interfaces and other advanced features to automate, simplify testing, improve safety and prevent calibration errors and damage to equipment

    ·         Quick connect test stand and interconnect to connect to the device under test

    ·         Standard color graphical user interface with full support in 11 languages

    Outstanding, wide-range performance in a single instrument

    The Fluke Calibration PPC4E is the latest member of our PPC family of controller/ calibrators to deliver extremely broad pressure range coverage at a level of performance that addresses your most common calibration workload. Calibrate transmitters, transducers, pressure switches, indicators, barometers and analog and digital gauges with ease using the color graphical user interface and advanced features.

    PPC4E nominal measurement uncertainty is ± 0.02 % of AutoRanged span. The AutoRange feature allows you to quickly and easily align PPC4E performance to match your requirements exactly. Are you trying to decide if you can provide the best coverage if you buy a 300 psi or a 160 psi calibrator? What if you later need to calibrate a 200 psi device? With PPC4E it doesn’t matter—accuracy is based on any AutoRanged span you enter, as long as it is within the instrument’s turndown range:

    ·         PPC4E models, 10:1 turndown (0.02 % of any AutoRanged span down to 10 % of PPC4E full scale pressure span)

    ·         PPC4EX models, 100:1 turndown (0.02 % of any AutoRanged span down to 1 % of PPC4E full scale pressure span)

    What if you receive a barometer for calibration? …or a vacuum gauge? PPC4E is still the right tool. All models (except for PPC4E 15K) include absolute pressure and negative gauge (vacuum) capabilities. Some PPC4E models also provide excellent coverage of draft pressure (inches of water, mbar) ranges. With multiple pressure modes and very wide turndown capabilities, one PPC4E controller can effectively replace multiple controllers, calibrators or even gas deadweight testers and deadweight ball gauges. Move up to the well-known reliability and precision of a Fluke Calibration PPC4E pressure controller and enjoy great value and return on investment.

    General Specifications

    Warm up time

    None required, 30 minute temperature stabilization recommended for best performance from cold power up

    Resolution

    To 1 ppm, user adjustable

    Power requirements

    100 to 240 V ac (-15%, +10%), 50-60 Hz, 70 VA max consumption

    Operating temperature range

    10 to 40 °C

    Weight

    16.6 kg (36.5 lb)

    Dimensions

    19 cm H x 35 cm W x 45 cm D (7.5 in. x 13.8 in. x 17.7 in.)

    Remote communication interfaces

    RS232 (COM1, COM2), IEEE-488.2, USB (front panel, firmware load only)

    Operating medium

    Any clean, dry, non-corrosive gas

    Pressure connections

    TEST (+), TEST (-):

    1/8 in. NPT F

    SUPPLY:

    1/8 in. NPT F

    EXHAUST:

    3/8 in. NPT F

    ATM:

    10-32 UNF


    PPC4E measurement uncertainty (includes precision and one year stability)1,2

    PPC4EX 14M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 140

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.1
    Minimum AutoRanged span [kPa]2: 140

    PPC4E 14M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 1400
    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 1
    Minimum AutoRanged span [kPa]2: 1400

    PPC4EX 7M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 70

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.05
    Minimum AutoRanged span [kPa]2: 70

    PPC4E 7M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 700

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.5
    Minimum AutoRanged span [kPa]2: 700

    PPC4EX 1.4M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 14

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.014
    Minimum AutoRanged span [kPa]2: 70

    PPC4E 1.4M

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: 140

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.1
    Minimum AutoRanged span [kPa]2: 140

    PPC4EX 100K

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: ± 1

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.014
    Minimum AutoRanged span [kPa]2:70

    PPC4E 100K

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: ± 10

    Absolute uncertainty1,4
    % of AutoRanged span: 0.02
    Constant [kPa]: 0.014
    Minimum AutoRanged span [kPa]2: 70

    PPC4E 15K

    Gauge uncertainty1,3
    % of AutoRanged span: 0.02
    Minimum AutoRanged span [kPa]2: ± 1.5

    1.     Maximum deviation of the RPT indication from the true value of applied pressure including precision, predicted one year stability limit, temperature effect and calibration uncertainty, combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement."

    2.     For AutoRange spans below the Minimum AutoRanged span uncertainty is equal to the value at the Minimum AutoRanged span.

    3.     Gauge uncertainty is a % of AutoRanged span. For example, an AutoRanged span of 3 500 kPa on model PPC4E 7M would have uncertainty of (0.02% * 3 500 kPa) = 0.35 kPa.

    4.     Absolute uncertainty is the sum of a % of AutoRanged span and a Constant that accounts for zero drift. For example, an AutoRanged span of 80 kPa on model PPC4EX 100K would have uncertainty of (0.02% * 80 kPa + 0.014 kPa) = 0.03 kPa.

    On-board barometer

    The on-board barometer is used only to measure changes in atmospheric pressure to provide dynamic compensation of an absolute RPT’s atmospheric pressure offset in gauge measurement mode with PPC4E models other than PPC4E 15k.

    On-board barometer

    Warm up time

    None required

    Range

    70 to 110 kPa (10 to 16 psi)

    Resolution

    0.001 % of span

    Precision
    Predicted stability

    0.1 % of span
    0.05 kPa/yr (0.008 psi/yr)


    Pressure control specifications

    Control precision

    PPC4E:
    ±0.0006% of controller span

    PPC4EX:
    ±0.0006% of controller span (AutoRanged span >10% of controller span)
    ±0.00006% of controller span (AutoRanged span ≤10% of controller span)

    Lowest controllable pressure
    (gauge mode)

    Zero set by automated venting. Lowest point above or below zero limited only by RPT resolution and control precision.

    Lowest controllable pressure
    (absolute, negative gauge modes)

    1 kPa absolute (0.15 psia) or gauge equivalent, for all models except PPC4E 7M and PPC4E 14M

    3.5 kPa(0.5 psia) for PPC4E 7M

    7 kPa(1 psia) for PPC4E 14M

    Ultimate pressure
    (absolute, negative gauge)
    Depending on vacuum pump and connections

    200 to 700 Pa absolute(2 to 7 mbar, 0.03 to 0.1 psia) or gauge equivalent

    Typical pressure setting ready time
    (0.005% hold limit, 50 cc test volume)

    15 to 30 s

    Slew time
    (ATM to FS with 50 cc test volume)

    30 s

    Typical test volume

    0 to 1000 cc for Controller Range of 1.4 MPa
    [300 psi] or less
    0 to 500 cc for Controller Range greater than 1.4 MPa [300 psi]

    Default dynamic control hold limit

    ± 0.01 % of current range

     

    型号

    描述

    6241-15K

    PPC4E Gas Pressure Controller Kit with PPC4E 15K, ± 1.5 to ± 15 kPa (± 0.2 to ± 2.2 psi) 

    Includes:

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6241-100K

    PPC4E Gas Pressure Controller Kit with PPC4E 100K, ± 10 to ± 100 kPa (± 1.5 to ± 15 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6241-1.4M

    PPC4E Gas Pressure Controller Kit with PPC4E 1.4M, 140 to 1,400 kpa (20 to 200 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6241-7M

    PPC4E Gas Pressure Controller Kit with PPC4E 7M, 700 to 7,000 kPa (100 to 1,000 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

    6242-100K

    PPC4E Gas Pressure Controller Kit with PPC4EX 100K, ± 1 to ± 100 kPa (± 0.15 to ± 15 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6242-1.4M

    PPC4E Gas Pressure Controller Kit with PPC4EX 1.4M, 14 to 1,400 kpa (2 to 200 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6242-7M

    PPC4E Gas Pressure Controller Kit with PPC4EX 7M, 70 to 7,000 kPa (10 to 1,000 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    6242-14M

    PPC4E Gas Pressure Controller Kit with PPC4EX 14M, 140 to 14,000 kPa (20 to 2,000 psi)

    Includes: 

    ·         PPC4E pressure controller/calibrator with power line cords and operating manual

    ·         SPLT self-purging liquid trap with connector to PPC4E

    ·         Mountable test stand for device under test with interconnect and quick connect fitting with adapters

     

    通用配件:


    配件

    描述

    Case

    加固且可重复使用的模制装运外壳(部件号 3338097

    机架安装套件

    标准 19in 机架安装工具机架

    PK-PPC-BG-DVU

    BG15K Q-RPT 用双倍容积单元(部件号 3070389

    真空参考套件,220V

    用于 PPC EXHAUST 端口的真空泵套件包括连接器(部件号 3584486

    COMPASS for Pressure

    自动执行测试、数据采集、报告与设备资产管理的软件

    RS232

    9 针线,2m用于 PPC4E COM1(部件号 2758335

     

    同类产品
    地址:青岛市崂山区海尔路29号温哥华花园5-1-401
    电话:0532-86069117 83812497 83821263
    传真:0532-88786387 网址:www.3017.cn
    青岛东方嘉仪电子科技有限公司 版权所有 备案号: 鲁ICP备08106748号