PRTs for laboratory freezers, autoclaves, and furnaces

·         5606: -200 °C to 160 °C

·         Calibration accuracy of ± 0.05 °C

·         Transition junction and lead wires can withstand full PRT temperature range

·         Unique probe seal of 5606 prevents ingress of moisture

·         Calibration not included; NVLAP-accredited calibration optional

The 5606 Full Immersion PRTs are designed to perform in extreme environments where both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe. (“Immersion” in this case simply means exposure to temperatures other than ambient and does not necessarily refer to the medium to which the PRT and its components are subjected.)

Applications where “full immersion” of probe, transition junction, and lead wire is required can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators. Other applications might include IQ/ OQ/PQ qualification procedures, temperature mapping, or data logging in temperature controlled spaces or environmental chambers.

The 5606 is just two inches (50 mm) in length with a sheath diameter of 1/8 inch (3.1 mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200 °C to 160 °C.

The 100 Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving calibration accuracies as good as ± 0.05 °C. You get both accuracy and flexibility built into a small, durable package.

The lead wires of the 5606 are made of single-conductor enameled copper wire which prevents moisture from wicking to the sensing element as it would if a more common, stranded lead wire were used. The diameter of the lead wire is no greater than 0.2 mm, making it easy to run lead wires through a freezer door to your readout or transmitter with effectively zero energy loss. The 5606 has been proven in common heat transfer fluids such as silicone oil, mineral oil, ethanol, and even liquid nitrogen with no degradation of the transition junction seal or lead wire insulation.

If you need longer lead wire than the standard length, call one of our Application Specialists today for a free quote. They can also help you determine which readout and probe termination are best suited for your application or help you select the right calibration for your probe.

[1] Includes calibration and 100 hr drift (k = 2).
[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k = 2).
[3] After 100 hours at max temp, 95 % confidence (k = 2).
[4] Temperatures outside this range will cause irreparable damage.
[5] Per ASTM E 644.

通用配件:

閹劍妲搁崥锔藉韫囧啴鈧鐎烽柨娆掝嚖鐎佃壈鍤ч弮鐘崇《娴ｈ法鏁ら敍锟�

閹劍妲搁崥锔藉韫囧啩鍗庨崳銊ㄥ窛闁插繋绗夋担瀹犫偓宀勨偓鈧幑銏ｆ彛闁參浜ｆス鑽ゅ劜閿涳拷

閹劍妲搁崥锔藉韫囧啩鍗庨崳銊ゅ▏閻€劋绨℃稉宥夋毐閻ㄥ嫭妞傞梻鏉戞皑閺冪姵纭剁紒褏鐢绘担璺ㄦ暏閼板矁顩﹂崣锕€顦婚幎鏇＄カ鐠愵厺鎷遍敍锟�

娑撴粍鏌熼崲澶夊崕閻欘剙顔嶉幓鎰返100%闂嗗爼顥撻梽鈺傚鐠囩尨绱濇穱婵婄槈鐠愵厺鎷遍崥搴濈瑝濠娾剝鍓伴崗宥堝瀭闁偓閹广垼鎻ｉ妴鍌氬涧鐟曚線鈧俺绻冮幋鎴滄粦閻ㄥ嫰鏀㈤崬顔绘眽閸涙ǹ绻樼悰灞界€烽崣椋庢畱闁瀚ㄩ敍灞肩閺冿箒鍠樻稊鏉挎倵娴ｈ法鏁ゆ稉宥嗗姬閹板骏绱濋幋鎴滄粦鐏忓棛鐝涢崡铏￥閺夆€叉娴滃牅浜掗幑銏ｆ彛閿涘本鍨�100%閸忋劑顤傞柅鈧潻妯挎彛濞嗕勘鈧拷