客户荣誉
kehury
技术文章
  • 济宁molbox RFM Gas Flow Calibrator Kits 5142
  • 邵氏硬度计使用说明
  • 铁路机车零、部件无损探伤规则
  • 无损检测的方法和覆层测厚仪
  • 涂层测厚仪涂镀层测试方法对照表
  • 数字逻辑分析仪概述
  • 采用导通角技术的低功耗、低成本脱机高压电源开关稳压器
  • 万用表使用两则
  • 工业企业照明设计标准GB50034-92
  • 酶标仪工作环境及注意事项
  • 济宁安特工程机械有限公司
    济宁百利达进出口贸易有限公司
    济宁东方模具制造有限公司
    济宁风雅颂酒业有限公司
    济宁富陆通机械设备有限公司
    济宁富源机械有限公司
    济宁高新区蓝冰丝杠销售部
    济宁翰诚焊接技术有限公司
    济宁恒昌机械设备有限公司
    济宁恒嘉模板科技有限公司
    济宁弘丰畜牧机械有限公司
    济宁华胜食品有限公司
    济宁惠生机械有限公司
    济宁金鸽食品有限公司
    济宁金属构造维修公司
    济宁锦泰焊接设备有限公司
    济宁骏兴机械设备有限公司
    济宁力生数控设备有限公司
    济宁林海造纸机械设备有限公司
    济宁麦德麦食品有限公司德意小屋分公司
    济宁麦德麦食品有限公司环城西路分公司
    济宁润泽输送设备有限公司
    济宁市百佳乐食品有限公司
    济宁市大力工矿物资有限公司
    济宁市鼎诚工矿工程设备有限公司
    济宁市光屹机械设备有限公司
    济宁市嘉运机械设备有限公司
    济宁市茂松石化有限公司
    济宁市美胜机械设备有限公司
    济宁市品高食品有限公司
    济宁市任城区甘诺宝力食品店
    济宁市任城区禾味酥食品店
    济宁市任城区美天莱食品店
    济宁市任城区孟师傅早点铺
    济宁市任城区米奇堡汉堡店
    济宁市任城区泉水茶庄
    济宁市任城区瑞红电机维修部
    济宁市任城区陶班长的咖啡店
    济宁市任城区祥发标准件销售中心
    济宁市任城区永心保健食品店
    济宁市任城区玉金居调味品店
    济宁市萨奥机械有限公司
    济宁市山一重工机械有限公司
    济宁市顺源机械厂
    济宁市顺源机械设备有限公司工程机械分公司
    济宁市顺源机械设备有限公司矿山设备分公司
    济宁市腾翼工程机械有限公司
    济宁市鑫隆煤机厂
    济宁市兖州区恩赐食品商店
    济宁市兖州区海鲜源食品专柜
    济宁市兖州区贾正远早点店
    济宁市兖州区浅啜茶叶销售部
    济宁市兖州区润泉净水设备有限公司
    济宁市兖州区唐何水果店
    济宁市兖州区天天鲜水果店
    济宁市兖州区兴隆庄镇连柱农机维修部
    济宁市兖州区张玉法农机维修部
    济宁市兖州区正昊玻璃模具厂
    济宁市昱松工程机械有限公司
    济宁帅珍食品有限公司
    济宁腾宇工程机械设备有限公司
    济宁天顺工程机械有限公司
    济宁沃尔华集团有限公司
    济宁鑫鹏数控设备有限公司
    济宁宇泰混凝土有限公司
    济宁宇越工矿机械设备有限公司
    济宁原生食品有限公司
    济宁运河缘食品有限公司汶上分公司
    济宁长信工程机械有限公司
    济宁中亚工程机械有限公司
    济宁众力电机车制造有限公司
    济宁铸美冶铸材料设备有限公司
    嘉祥县爱雯食品店
    嘉祥县城区李春梅食品店
    嘉祥县城区刘保军调味品店
    嘉祥县葛福瑞食品店
    嘉祥县杰达农机维修部
    嘉祥县金屯镇芳雨食品商店
    嘉祥县梁宝寺镇安祥模具厂
    嘉祥县隆力奇爱家食品店
    嘉祥县马集镇琳琳食品商店
    嘉祥县明富机械厂
    嘉祥县鑫博副食品店、
    嘉祥县秀丽食品店
    金乡县高河街道大俊水果部
    金乡县高河街道志法农机维修部
    金乡县晗利食品有限公司
    金乡县鸿通冷藏有限公司
    金乡县金乡街道汇湘茶叶店
    金乡县金乡街道老宋水果店
    金乡县金乡街道沐阳水果店
    金乡县金乡街道天合原冷库
    金乡县金兴经济园力口伟水果店
    金乡县快易点食品科技有限公司
    金乡县马庙镇超强面粉批发部
    金乡县润旺冷藏有限公司
    金乡县羊山镇茶缘茶叶销售店
    金乡县源泉石磨面粉有限公司
    当前位置:首页 > 济宁仪器仪表 > 济宁电子电工 > 济宁计量校准
    molbox RFM Gas Flow Calibrator Kits
    型 号:5142
    品 牌:美国FLUKE
    技术指标:Maximum working measurement line pressure  600 kPa (87 psi) absolute
    济宁molbox RFM Gas Flow Calibrator Kits-5142-美国FLUKE

    High end gas flow calibration made simple

    Fluke Calibration 5141, 5142 and 5144 molbox RFM gas flow calibrator kits feature molbox RFM and molbloc-L configurations optimized to cover a very wide workload combined with molstic-L and other interconnect hardware needed for a complete calibration system. Simply supply 90 psi of pure N2 or air to the system. An included regulator delivers a stable regulated flow to the molbloc. Downstream of the molbloc, an included metering valve allows you to regulate the mass flow value required for the DUT. It’s that simple; supply 90 psi gas upstream, tare the reading, and adjust the fine metering valve to deliver the desired mass flow rate with an accuracy of ± 0.5 % of reading. Fluke Calibration gas flow calibrator kits eliminate complication, but don’t compromise molbox/molbloc best in class performance.

    ·          Flow ranges cover from 1 sccm to 50 slm

    ·         ± 0.5 % of reading total one-year accuracy

    ·         Measures mass and volume flow with user settable reference pressure and temperature conditions

    ·         Reference standard is upstream of the device under test, eliminating cross contamination and expensive damage to the flow elements

    ·         Integrated gas flow regulation and adjustment hardware

    ·         Expandable to over 5000 slm with additional molbloc flow elements and control hardware

    ·         Includes traceable calibration for operation in N2 and Air, with corrections for other gases

    ·         Gas supply and test adapters included for 1/4 in tube, 1/4 in NPT and 1/4 in BSP

    ·         Includes advanced functions such as totalize, average, hi/lo, deviation, on-board purge, leak test and tare, available from the front control panel or by RS-232 and IEEE-488 remote interfaces

    A new standard in high end gas flow calibration

    Fluke Calibration revolutionized high end gas flow calibration with the introduction of molbox/ molbloc mass flow standards. molbox/molbloc systems have replaced large, inflexible, error prone volumetric piston provers and bell provers with a compact, easy to use, versatile digital standard. molbox/molbloc systems are the standard of choice for high end calibration labs and mass flow device manufacturers around the world. Improvements offered by molbox/molbloc include:

    ·         True mass flow calibration and traceability— no corrections from volumetric to mass

    ·         Real-time digital mass flow indication, loaded with features—easily automated

    ·         No moving parts—uninterrupted gas flow measurement, no fluctuations from piston stroke

    ·         Flexibility to be positioned upstream or downstream— can calibrate at many line pressures

    ·         Modular components allows future upgrade and expansion

    ·         Very wide range with small footprint—no flow straightening hardware required

     Whether your requirement is manual calibration of a simple variable area flow meter (rotameter) or fully automated calibration of a mass flow controller (MFC), molbox/molbloc systems offer the ideal solution. A molbox RFM with one or more molbloc flow elements can cover a wide range of flow calibration devices with total one-year measurement uncertainty of ± 0.5 % of reading. If your needs change, molbloc flow elements can be added, with models covering flows from 1 sccm to over 5000 slm (175 scfm). If better measurement uncertainty is needed, the same flow elements can be used with molbox1+ to achieve accuracy as good as ± 0.125 % of reading.

    Measurement specifications

    Gas calibration included

    Nitrogen (N2), Air

    Maximum working measurement line pressure

    600 kPa (87 psi) absolute

    Measurement range

    <1sccm to 50 slm, depending on model. Flow ranges depend on test gas. Ranged indicated for N2 and Air.

     

    型号

    描述

    5141-100

    molbox RFM, molbloc 5E1-L 10 to 100 sccm

    Included:

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E1-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-1K

    molbox RFM, molbloc 5E2-L 100 to 1,000 sccm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-10K

    molbox RFM, molbloc 5E3-L 1 to 10 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E3-L laminar flow element

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-50K

    molbox RFM, molbloc 3E4-L 5 to 50 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 3E4-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-1K

    molbox RFM-M, molbloc 5E2-L 10 to 1,000 sccm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-10K

    molbox RFM-M, molbloc 5E3-L 0.1 to 10 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E3-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-50K

    molbox RFM-M, molbloc 3E4-L 0.5 to 50 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 3E4-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5144-50K

    molbox RFM-M, molblocs 5E2-L and 3E4-L10 sccm to 50 slm

    Included:

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L and 3E4-L laminar flow elements

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    同类产品
    地址:青岛市崂山区海尔路29号温哥华花园5-1-401
    电话:0532-86069117 83812497 83821263
    传真:0532-88786387 网址:www.3017.cn
    青岛东方嘉仪电子科技有限公司 版权所有 备案号: 鲁ICP备08106748号