连云港红外热像仪FLIR A310 ex,连云港红外热像仪价格

连云港红外热像仪-FLIR A310 ex-美国FLIR

Fully compliant with ATEX regulations

Use the power of thermal imaging in hazardous locations.

Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.

FLIR A310 ex Thermal Camera Features

Heater
Sensors for temperature, air humidity, voltage & pressure
Power supply: 24V DC
2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
ATEX compliant housing

Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

Flame-Proof Enclosure “d”

Prevents any explosion transmission from the inside of the enclosure to the outside.

For use in harsh environments: IP67

The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

Integrated controller

The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

Flexible integration

The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

Heater

FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

Plug and play installation

FLIR A310 ex is lightweight and the entire system is delivered ready for use.

Verification Certificate ZELM 12 ATEX 0485 X

The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

FLIR A310 ex Technical Specifications

General Data
Ambient temperature range for operation	–20°C to +40°C (-4°F to 104°F)
Protection class	IP67
Weight	6.7 kg (without camera and lens)
Empty volume	5.06 l
External dimensions (without sun shield)	D = 170 mm, L = 408 mm
Housing material / Surface	Nickel-plated aluminium / Powder coated
Protection window	Germanium, double-sided AR Coated, externally with additional hard-carbon layer
Maximum power of the additional heater	16 W
Operating voltage	24 V DC
Maximum electric connection power	60 W
Power cable / Power cable configuration	Helukabel 37264 / Pigtail
Length of power cable	4 m (13 ft.)
Integrated controller	4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
Ethernet medium	Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
Length of Ethernet cable	4 m (13 ft.)
Ethernet, configuration	Pigtail with FC-connector
Explosion protection-specific data
For use in EX zone	1, 2, 21, and 22
Ignition protection category	Flame-proof enclosure “d”
Maximum surface temperature (according to temperature class T6)	Maximum 85°C
ATEX certification (version -AXC)	EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
Verification certificate	ZELM 12 ATEX 0485 X
Imaging and optical data
IR resolution	320 × 240 pixels
Thermal sensitivity/NETD	< 0.05°C @ +30°C (+86°F) / 50 mK
Field of view (FOV) / Focal length	25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
Minimum focus distance	0.4 m (1.31 ft.)
Spatial resolution (IFOV)	1.36 mrad with 25° lens or 2.59 mrad with 45° lens
Lens identification	Automatic
F-number	1.3
Image frequency	30 Hz
Focus	Automatic or manual (built in motor)
Zoom	1–8× continuous, digital, interpolating zooming on images
Detector data
Detector type	Focal Plane Array (FPA), uncooled microbolometer
Spectral range	7.5–13 μm
Detector pitch	25 μm
Detector time constant	Typical 12 ms
Measurement
Object temperature range	–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
Accuracy	±2°C (±3.6°F) or ±2% of reading
Measurement analysis
Spotmeter	10
Area	10 boxes with max./min./average/position
Isotherm	1 with above/below/interval
Measurement option	Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
Difference temperature	Delta temperature between measurement functions or reference temperature
Reference temperature	Manually set or captured from any measurement function
Atmospheric transmission correction	Automatic, based on inputs for distance, atmospheric temperature and relative humidity
Optics transmission correction	Automatic, based on signals from internal sensors
Emissivity correction	Variable from 0.01 to 1.0
Reflected apparent temperature correction	Automatic, based on input of reflected temperature
External optics/windows correction	Automatic, based on input of optics/window transmission and temperature
Measurement corrections	Global and individual object parameters
Alarm
Alarm functions	6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
Alarm output	Digital Out, log, store image, file sending (ftp), email (SMTP), notification
Set-up
Color palettes	Color palettes (BW, BW inv, Iron, Rain)
Set-up commands	Date/time, Temperature°C/°F
Storage of images
Storage media	Built-in memory for image storage
File formats	Standard JPEG, 16-bit measurement data included
Ethernet
Ethernet	Control, result and image
Ethernet, type / standard	100 Mbps / IEEE 802.3
Ethernet, configuration	Pigtail with FC-connector (fiber)
Ethernet, communication	TCP/IP socket-based FLIR proprietary
Ethernet, video streaming	MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
Ethernet, image streaming	16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
Ethernet, protocols	Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
Shipping information
Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM

，红外热像仪工作原理，


地址：青岛市崂山区海尔路29号温哥华花园5-1-401 电话：0532-86069117　83812497　83821263 传真：0532-88786387 网址：www.3017.cn 青岛东方嘉仪电子科技有限公司版权所有备案号: 鲁ICP备08106748号