客户荣誉
kehury
技术文章
  • 章丘molbox RFM Gas Flow Calibrator Kits 5141
  • 压力校验仪带HART功能的好处
  • 压力式温度计测量原理
  • 布氏硬度计准确测量的因素及排除方法
  • 热处理工件硬度的检测方法
  • 风速是怎么测量出来的?
  • 万用表各挡量程选择及测量误差分析
  • 碳硫分析仪漏气情况的检测和修复方法
  • 温度计、压力计等怎样连接计算机,使计算机按时间记录温度、压力?
  • 光纤传感器的基本工作原理
  • 章丘市顺泽篷布有限公司
    章丘市台头钢球厂
    章丘市文祖汇鑫石料厂
    章丘市新峰石化配件厂
    章丘市旭钰锻铸有限公司
    章丘市焱阳建材营销中心
    章丘市益源机械配件厂
    章丘市谊仁得石料有限公司
    章丘市永明法兰厂
    章丘市永田顺泰保温防腐有限公司
    章丘市玉岩石料有限公司
    章丘市裕华阳光电动技术有限公司
    章丘市裕民机械厂
    章丘市煜宏锻造机械有限责任公司
    章丘相公建华模具厂
    济南国峰金属磨料公司
    济南海昌电器有限公司
    济南佳悦电子有限公司
    济南金池建材有限公司
    济南市参银钢砂厂
    济南顺达路桥有限公司
    济南玉涛锻造机械有限公司
    山东八三碳化硅热件厂经销公司
    山东达盛科技有限公司
    山东东辰工程塑料有限公司
    山东恒安伟展门业有限公司
    山东华民钢球钢棒股份有限公司
    山东华民铸锻股份有限公司
    山东华民铸锻股份有限公司-国内销售处
    山东济南普英电子有限公司
    山东济南其玉钢砂厂
    山东三新电子有限公司
    山东省济南市其玉钢砂厂
    山东省章丘市法兰厂
    山东省章丘市龙山街道办事处
    山东省章丘市普集镇发达锻造厂
    山东省章丘市汽车配件制造有限公司
    山东省章丘市益泰机械制造有限公司
    山东省章丘市重诺锻铸有限公司
    山东袁庄远航机械厂
    山东章丘明水玉军法兰厂
    山东章丘普及锻造厂
    山东章丘市万兴石化配件厂
    章丘诚瀚电子科技有限公司
    章丘东汉铁艺有限公司
    章丘东铁铸锻有限公司
    章丘汇鑫铝制品加工厂
    章丘鲁鹏锻件制造厂
    章丘盛强钢球有限公司
    章丘市保民锻造厂
    章丘市大宇机械厂
    章丘市叮当铁匠铺
    章丘市法兰厂
    章丘市福海百川法兰有限公司
    章丘市合聚塑料厂
    章丘市华康彩色橡胶地砖厂
    章丘市华美塑料制品有限责任公司
    章丘市机械厂
    章丘市精钢闸门制造有限公司
    章丘市科兴机械厂
    章丘市立达篷布制品有限公司
    章丘市明水钢虹法兰厂
    章丘市明水永杰法兰厂
    章丘市强盛机械厂
    章丘市庆煌门业公司
    章丘市瑞丰机械厂
    章丘市润昌机械厂
    章丘市三鼎建筑机械有限责任公司
    章丘新梅橡塑制品厂
    章丘鑫沛铸锻厂
    章丘亚控电子产品有限公司
    章丘银城卡箍厂
    章丘振宇锻造有限公司
    当前位置:首页 > 章丘仪器仪表 > 章丘电子电工 > 章丘计量校准
    molbox RFM Gas Flow Calibrator Kits
    型 号:5141
    品 牌:美国福禄克FLUKE
    技术指标:Maximum working measurement line pressure  600 kPa (87 psi) absolute
    章丘molbox RFM Gas Flow Calibrator Kits-5141-美国福禄克FLUKE

    High end gas flow calibration made simple

    Fluke Calibration 5141, 5142 and 5144 molbox RFM gas flow calibrator kits feature molbox RFM and molbloc-L configurations optimized to cover a very wide workload combined with molstic-L and other interconnect hardware needed for a complete calibration system. Simply supply 90 psi of pure N2 or air to the system. An included regulator delivers a stable regulated flow to the molbloc. Downstream of the molbloc, an included metering valve allows you to regulate the mass flow value required for the DUT. It’s that simple; supply 90 psi gas upstream, tare the reading, and adjust the fine metering valve to deliver the desired mass flow rate with an accuracy of ± 0.5 % of reading. Fluke Calibration gas flow calibrator kits eliminate complication, but don’t compromise molbox/molbloc best in class performance.

    ·          Flow ranges cover from 1 sccm to 50 slm

    ·         ± 0.5 % of reading total one-year accuracy

    ·         Measures mass and volume flow with user settable reference pressure and temperature conditions

    ·         Reference standard is upstream of the device under test, eliminating cross contamination and expensive damage to the flow elements

    ·         Integrated gas flow regulation and adjustment hardware

    ·         Expandable to over 5000 slm with additional molbloc flow elements and control hardware

    ·         Includes traceable calibration for operation in N2 and Air, with corrections for other gases

    ·         Gas supply and test adapters included for 1/4 in tube, 1/4 in NPT and 1/4 in BSP

    ·         Includes advanced functions such as totalize, average, hi/lo, deviation, on-board purge, leak test and tare, available from the front control panel or by RS-232 and IEEE-488 remote interfaces

    A new standard in high end gas flow calibration

    Fluke Calibration revolutionized high end gas flow calibration with the introduction of molbox/ molbloc mass flow standards. molbox/molbloc systems have replaced large, inflexible, error prone volumetric piston provers and bell provers with a compact, easy to use, versatile digital standard. molbox/molbloc systems are the standard of choice for high end calibration labs and mass flow device manufacturers around the world. Improvements offered by molbox/molbloc include:

    ·         True mass flow calibration and traceability— no corrections from volumetric to mass

    ·         Real-time digital mass flow indication, loaded with features—easily automated

    ·         No moving parts—uninterrupted gas flow measurement, no fluctuations from piston stroke

    ·         Flexibility to be positioned upstream or downstream— can calibrate at many line pressures

    ·         Modular components allows future upgrade and expansion

    ·         Very wide range with small footprint—no flow straightening hardware required

     Whether your requirement is manual calibration of a simple variable area flow meter (rotameter) or fully automated calibration of a mass flow controller (MFC), molbox/molbloc systems offer the ideal solution. A molbox RFM with one or more molbloc flow elements can cover a wide range of flow calibration devices with total one-year measurement uncertainty of ± 0.5 % of reading. If your needs change, molbloc flow elements can be added, with models covering flows from 1 sccm to over 5000 slm (175 scfm). If better measurement uncertainty is needed, the same flow elements can be used with molbox1+ to achieve accuracy as good as ± 0.125 % of reading.

    Measurement specifications

    Gas calibration included

    Nitrogen (N2), Air

    Maximum working measurement line pressure

    600 kPa (87 psi) absolute

    Measurement range

    <1sccm to 50 slm, depending on model. Flow ranges depend on test gas. Ranged indicated for N2 and Air.

     

    型号

    描述

    5141-100

    molbox RFM, molbloc 5E1-L 10 to 100 sccm

    Included:

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E1-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-1K

    molbox RFM, molbloc 5E2-L 100 to 1,000 sccm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-10K

    molbox RFM, molbloc 5E3-L 1 to 10 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E3-L laminar flow element

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-50K

    molbox RFM, molbloc 3E4-L 5 to 50 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 3E4-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-1K

    molbox RFM-M, molbloc 5E2-L 10 to 1,000 sccm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-10K

    molbox RFM-M, molbloc 5E3-L 0.1 to 10 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E3-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-50K

    molbox RFM-M, molbloc 3E4-L 0.5 to 50 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 3E4-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5144-50K

    molbox RFM-M, molblocs 5E2-L and 3E4-L10 sccm to 50 slm

    Included:

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L and 3E4-L laminar flow elements

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    同类产品
    地址:青岛市崂山区海尔路29号温哥华花园5-1-401
    电话:0532-86069117 83812497 83821263
    传真:0532-88786387 网址:www.3017.cn
    青岛东方嘉仪电子科技有限公司 版权所有 备案号: 鲁ICP备08106748号